ProGrip Pre-aggregated Two-Pack Epoxy
Product Highlights
Low Odour
Fast Drying
Highly hardwearing
Special colours to order
Suitable Surfaces: Wood, Concrete, Masonry, asphalt
Finish: Aggregated Off-gloss finish
Application: Shortpile Roller or brush
Drying time: Touch Dry for 4 hours or 8-12 hours hard dry. Full Cure 5-7 days
Overcoat time: 16 hours min or 72 hours max
Estimated Coverage: 6-10m² per kg
Product Description
ProGrip is a Pre-aggregated, water-based, solvent-free, two-pack epoxy floor coating.
Suitable for use in heavy traffic areas such as foot, forklift and vans. It can be used for both interior and exterior. It can also be used on existing stable paints.
The anti-slip option is built into the paint, saving you time.
As with all paint products please read the technical datasheet before use. If you have any questions or need technical advice we are here to help please call 01482 328053 or email info@coo-var.co.uk.
RAL, BS4800, BS381C & NCS Colours to Order (Minimum of 5KG Required).
Please note: This product is sold as a 5KG mixed unit and is dispatched in 2 separate cans a 2.5L & 5L
ProGrip FAQ's
Can ProGrip two pack epoxy floor paint be applied to any surface?
Concrete, wood, tarmac, tiles and metal.
Can I apply ProGrip two pack epoxy floor paint over a previous floor paint?
We recommend applying this floor paint over previous two-pack epxoy floor paints only, applying over a single pack floor paint is not recommended.
Do I need a primer when applying ProGrip two pack epoxy floor paint?
We recommend priming bare concrete with ProSeal High Performance Primer
How should I prepare the surface before applying the paint?
For concrete floors acid etching may be necessary to remove dust and laitance.
Ensure the surface is completely clean and dry before application, coo-var degreaser or oil remover can be used to clean the floor.
Moisture content of the surface should be less than 14% prior to painting.
For other surfaces, appropriate cleaning and sanding may be required to create a suitable profile for the paint to adhere to.
For previously painted surfaces, make sure to clean, abrade and remove all loose and falking material.
How long does ProGrip two pack epoxy floor paint take to dry?
Ovecoat time is 16 hours, you can walk over the surface after 24 but we recommend leaving the floor 5 - 7 days before heavy traffic.
What type of roller should I use to apply ProGrip two pack epoxy floor paint?
We suggest using a short pile roller sleeve.
How many coats of ProGrip two pack epoxy floor paint should I apply?
Two coats.
What maintenance is required for ProGrip?
Regular sweeping and mopping with a non-abrasive cleaner will keep the floor looking good. Avoid using harsh chemicals or abrasive cleaning tools, as these can damage the epoxy coating. Additionally, promptly clean up any spills to prevent staining.
Recommended System
Recommended Systems: (click product titles to go to product)
Concrete Preperation: Oil Remover, Degreaser , Acid Etch
Concrete Primer: Proseal High Performance Primer
Wood Preperation: Degreaser
Wood Primer: Proseal High Performance Primer
Technical Information
ProGrip TDS
135/W280 - ProGrip Clear Hardener
135/W280 - ProGrip Hardener - All Except Green
135/W280 - ProGrip Base for Clear & Green
135-W280 - ProGrip Hardener for Green - SDS21210 – UK
135-W280 - ProGrip Base for Clear & Green - SDS21216 – UK
135-W280 - ProGrip Base Black White Safety Red & Yellow - SDS21214 – UK
Coo-Var Floor Paint Life Expectancies T_C.pdf
Delivery
Standard delivery 48 to 72 hours (business hours). Prices are excluding VAT.
Zone | Free Delivery on Orders Over | Standard Delivery Charge |
Zone 1 - UK Mainland | £150 | £7.00 |
Zone 2 - Highlands & Islands/Isle of Man/Isles of Scilly/Isle of Wight | £350 | £30.00 |
Channel Isles & Ireland - Contact 01482 328053 |
*Please note that these prices only apply for UK Mainland and the Islands above.
If in doubt please call 01482 328052 or email info@coo-var.co.uk