Glocote Fluorescent Paint

Product Highlights

High visibility under light

For exterior and interior use

Suitable Surfaces: Wood, Metal, Masonry

Finish: Matt

Application: Roller, brush or spray

Drying time: Touch Dry 3 hours or 12 hours hard dry

Overcoat time: 12 hours or over night

Estimated Coverage: 13m² per litre

Health and Safety: Contains 2-BUTANONE OXIME, COBALT CONTAINING POLYMER. May produce an allergic reaction

Product Description

A high visibility paint which is effective in daylight or under lights at night to identify hazards or safety equipment such as fire extinguishers, skips and exits.

Ideal for use on bicycles, skips, bollards, fishing floats, bridges, signs, ships etc. Also used for theatrical effects.

As with all paint products please read the technical datasheet before use. If you have any questions or need technical advice we are here to help please call 01482 328053 or email info@coo-var.co.uk.

Glocote Fluorescent FAQ's

What is fluorescent paint?

Fluorescent paint contains pigments that absorb ultraviolet (UV) light and re-emit it as visible light. This makes the paint appear to glow brightly under UV light and can even enhance its visibility in daylight.

Where is fluorescent paint commonly used?

Safety Applications: For high-visibility signs, emergency exits, and road markings.

Artistic Projects: In murals, paintings, and creative designs.

Entertainment: In theaters, nightclubs, and amusement parks.

Industrial Applications: For marking hazards or enhancing visibility in low-light conditions.

Coo-Var Fluorescent is not reccommend to be used on areas that will be walked on or have vehicles going over it.

Is fluorescent paint the same as glow-in-the-dark paint?

No, fluorescent paint requires UV light to glow, whereas glow-in-the-dark paint (phosphorescent paint) absorbs light and re-emits it over time, allowing it to glow in the dark without an external light source.

How should fluorescent paint be applied?

Surface Preparation: Clean and prime the surface if necessary.
Application: Apply with a brush, roller, or spray, following the manufacturer’s instructions. Multiple coats may be needed for optimal brightness.
Drying Time: Allow sufficient drying time between coats and after the final coat.

Can fluorescent paint be used outdoors?

Yes, but it should be formulated for exterior use to withstand weather conditions. Some fluorescent paints may fade over time when exposed to sunlight, so selecting a high-quality, UV-resistant product is essential.

Does fluorescent paint require a special primer?

While not always necessary, using Glocote Foundation Base which is a white background will enhance the brightness and effectiveness of the fluorescent paint. Painting on other colour backgrounds will not give the fluroscent effect.

How long does the fluorescent effect last?

The longevity of the fluorescent effect depends on the quality of the paint and environmental exposure. Fluorescent paints may fade faster due to UV exposure, but can be protected with Glocote Protective Glaze.

Is fluorescent paint safe to use?

Most fluorescent paints are safe for use if applied according to the manufacturer’s instructions. However, proper ventilation, protective gear (like gloves and masks), and avoiding skin contact are recommended during application.

Can fluorescent paint be removed?

Yes, it can be removed using standard paint removers or by sanding, depending on the surface.

Recommended System

Recommended Systems: (click product titles to go to product)

Compatiable on most surfaces

General Surface Preperation: Oil Remover or Degreaser

General Surface Primer:GlocoteFluorescent Foundation Base

General Surface Midcoat: Glocote Fluorescent Paint

General Surface Topcoat : Glocote Fluorescent Protective Glaze

Metal Preperation: Degreaser

Metal Primer: Zinc Phosphate Primerfirst and then overcoat with GlocoteFluorescent Foundation Base

Metal Surface Midcoat: Glocote Fluorescent Paint

Metal Surface Topcoat : Glocote Fluorescent Protective Glaze

Delivery

Standard delivery 48 to 72 hours (business hours). Prices are excluding VAT.

Zone Free Delivery on Orders Over Standard Delivery Charge
Zone 1 - UK Mainland £150 £7.00
Zone 2 - Highlands & Islands/Isle of Man/Isles of Scilly/Isle of Wight £350 £30.00
Channel Isles & Ireland - Contact 01482 328053    

*Please note that these prices only apply for UK Mainland and the Islands above.

If in doubt please call 01482 328052 or email info@coo-var.co.uk

Comes in these colours: *

  • Orange

  • Pink

  • Yellow

  • Green

  • Red

* Please note that due to variations in monitor settings, the colours displayed here are for illustration purposes only.

For more accurate colour representation please request a colour card to be posted to you.

Subscribe

* indicates required
Email Format

Powered by MailChimp