Profloor Two-Pack Epoxy Floor Paint

Product Highlights

Low Odour

Fast Drying

Water-Based

Exeptional Coverage

Highly hardwearing

Special colours to order

Suitable Surfaces: Wood, Concrete, Masonary, Ashphalt and Suitabley Prepared Metal.

Finish: Off Gloss

Application: Shortpile Roller or brush

Drying time: Touch Dry 4 hours or 8-12 hours hard dry. Full Cure 5-7 days

Overcoat time: 16 hours min or 72 hours max

Estimated Coverage: 6-10m² per kg

Product Description

Coo-Var Profloor is a hard wearing water based, solvent free two pack floor coating. Suitable for use in heavy traffic areas such as foot, forklift and vans. Can be used in for both interior and exterior and it can also be used on existing stable paints.

As with all paint products please read the technical datasheet before use. If you have any questions or need technical advice we are here to help please call 01482 328053 or email info@coo-var.co.uk.

RAL, BS4800, BS381C & NCS Colours to Order (Minimum of 5L Required).

Please note: This product is sold as a 5KG mixed unit and is dispatched in 2 separate cans a 2.5L & 5L

Profloor FAQ's

Can Profloor two-pack epoxy floor paint be applied to any surface?

Profloor can be applied to concrete, tarmac, wood, and metal.

Can I apply Profloor two-pack epoxy floor paint over a previous floor paint?

We recommend applying this floor paint over previous two-pack epoxy floor paints only, applying over a single pack floor paint is not recommended.

Do I need a primer when applying a two-pack epoxy floor paint?

We recommend priming bare concrete with ProSeal High Performance Primer

For Metal use 2 Pack Zinc Phosphate Primer

How should I prepare the surface before applying the paint?

For concrete floors, acid etching may be necessary to remove dust and laitance.

Ensure the surface is completely clean and dry before application, coo-var degreaser or oil remover can be used to clean the floor.

Moisture content of the surface should be less than 14% prior to painting.

For other surfaces, appropriate cleaning and sanding may be required to create a suitable profile for the paint to adhere to.

For previously painted surfaces, make sure to clean, abrade and remove all loose and falking material.

How long does Profloor two-pack epoxy floor paint take to dry?
Ovecoat time is 16 hours, you can walk over the surface after 24 but we recommend leaving the floor 5 - 7 days before heavy traffic.

How many coats of Profloor two-pack epoxy floor paintshould I apply?
Two coats.

What maintenance is required for Profloor two-pack epoxy floor paint?
Regular sweeping and mopping with a non-abrasive cleaner will keep the floor looking good. Avoid using harsh chemicals or abrasive cleaning tools, as these can damage the epoxy coating. Additionally, promptly clean up any spills to prevent staining.

Recommended System

Recommended Systems: (click product titles to go to product)

Concrete Preperation: Oil Remover, DegreaserAcid Etch

Concrete Primer: Proseal High Performance Primer

Wood Preperation: Degreaser

Wood Primer: Proseal High Performance Primer

Delivery

Standard delivery 48 to 72 hours (business hours). Prices are excluding VAT.

Zone Free Delivery on Orders Over Standard Delivery Charge
Zone 1 - UK Mainland £150 £7.00
Zone 2 - Highlands & Islands/Isle of Man/Isles of Scilly/Isle of Wight £350 £30.00
Channel Isles & Ireland - Contact 01482 328053    

*Please note that these prices only apply for UK Mainland and the Islands above.

If in doubt please call 01482 328052 or email info@coo-var.co.uk

Comes in these colours: *

  • Tile Red

  • Green

  • White

  • Light Grey

  • Yellow

  • Grey

  • Clear

* Please note that due to variations in monitor settings, the colours displayed here are for illustration purposes only.

For more accurate colour representation please request a colour card to be posted to you.

Subscribe

* indicates required
Email Format

Powered by MailChimp