Graffiti Protection System Gloss Finish

Product Highlights

Fast drying - apply two coats in one day

Wash off graffiti using only water!

Single Pack

For exterior use

Suitable Surfaces: Concrete, Metal, Masonry

Finish: Gloss

Application: Roller, brush or spray

Drying time: Touch Dry 1-2 hours or 2.5 hours hard dry

Overcoat time: 4-6 hours

Estimated Coverage: 8-10m² per litre

Health and Safety: Contains: OXIMINO-SILANE

Product Description

This single pack system offers long-term protection against both graffiti and flyposting (glue/tapes will not stick). No solvents are required to wash off graffiti (use water only) saving time and money. Check small area first if applying to plastic, metal or paint.

As with all paint products please read the technical datasheet before use. If you have any questions or need technical advice we are here to help please call 01482 328053 or email





GP101 Graffiti Protection System FAQ's

What is single pack GP101 anti-graffiti coating?

A single pack GP101 anti-graffiti coating is a type of protective coating designed to prevent graffiti from adhering to surfaces, making it easier to clean and remove

How does it prevent graffiti?

Provide a durable, non-porous barrier that prevents graffiti materials from penetrating the surface and makes it easier to clean with water and mild detergents without damaging the underlying surface.

Where can GP101 anti-graffiti coating be applied?

It can be applied on a variety of surfaces including concrete, brick, metal, and previously painted surfaces that have had a previous solvent based or water based paint on. It is commonly used on status and works of art.

Porous surfaces need to be sealed with Sealer Coat for Graffiti Protection

What are the benefits of using this type of coating?

Durability: Highly resistant to weather, abrasion, and chemicals.
Easy Maintenance: Simplifies graffiti removal, reducing maintenance costs and effort.
Aesthetic Preservation:Helps keep surfaces looking clean and new over time.
Protective:Offers protection against environmental damage.

How is the coating applied?

The surface must be prepared by cleaning and making sure there is no loose or flaking material. then applied using a brush, roller or spray.

How long does it take to cure?

Based on a temperature of 20 °C

Touch dry 1-2 hours Hard dry 2.5 hours. Overcoating time is 4-6 Hours

How often does it need to be reapplied?

The longevity of the coating can vary based on exposure and wear, but generally, it can last several years before reapplication is necessary. Regular maintenance and cleaning can help extend its life.

Recommended System

Recommended Systems: (click product titles to go to product)

Concrete Preperation: Oil Remover

Concrete Primer: Graffiti Protection System Sealer Coat

Metal Preperation: Degreaser

Metal Primer: Coo-Var Zinc Phosphate Primer

Wood Preperation: Degreaser

Wood Primer: Graffiti Protection System Sealer Coat

Porous Surface Primer: Graffiti Protection System Sealer Coat


Standard delivery 48 to 72 hours (business hours). Prices are excluding VAT.

Zone Free Delivery on Orders Over Standard Delivery Charge
Zone 1 - UK Mainland £150 £7.00
Zone 2 - Highlands & Islands/Isle of Man/Isles of Scilly/Isle of Wight £350 £30.00
Channel Isles & Ireland - Contact 01482 328053    

*Please note that these prices only apply for UK Mainland and the Islands above.

If in doubt please call 01482 328052 or email‚Äč

Comes in these colours: *

  • Clear

* Please note that due to variations in monitor settings, the colours displayed here are for illustration purposes only.

For more accurate colour representation please request a colour card to be posted to you.


* indicates required
Email Format

Powered by MailChimp